<!doctype refentry PUBLIC "-//OASIS//DTD DocBook V4.1//EN" [

<!-- Process this file with docbook-to-man to generate an nroff manual
page: `docbook-to-man manpage.sgml > manpage.1'.  You may view
the manual page with: `docbook-to-man manpage.sgml | nroff -man |
less'.  A typical entry in a Makefile or Makefile.am is:

manpage.1: manpage.sgml
docbook-to-man $< > $@


The docbook-to-man binary is found in the docbook-to-man package.
Please remember that if you create the nroff version in one of the
debian/rules file targets (such as build), you will need to include
docbook-to-man in your Build-Depends control field.

-->

<!-- Fill in your name for FIRSTNAME and SURNAME. -->
<!ENTITY dhfirstname "<firstname>Michael</firstname>">
<!ENTITY dhsurname   "<surname>Fladischer</surname>">
<!-- Please adjust the date whenever revising the manpage. -->
<!ENTITY dhdate      "<date>09 September 2013</date>">
<!-- SECTION should be 1-8, maybe w/ subsection other parameters are
allowed: see man(7), man(1). -->
<!ENTITY dhsection   "<manvolnum>1</manvolnum>">
<!ENTITY dhemail     "<email>FladischerMichael@fladi.at</email>">
<!ENTITY dhusername  "fladi">
<!ENTITY dhucpackage "<refentrytitle>PYXBWSDL</refentrytitle>">
<!ENTITY dhpackage   "pyxbwsdl">

<!ENTITY debian      "<productname>Debian</productname>">
<!ENTITY gnu         "<acronym>GNU</acronym>">
<!ENTITY gpl         "&gnu; <acronym>GPL</acronym>">
]>

<refentry>
    <refentryinfo>
        <address>
            &dhemail;
        </address>
        <author>
            &dhfirstname;
            &dhsurname;
        </author>
        <copyright>
            <year>2013</year>
            <holder>&dhusername;</holder>
        </copyright>
        &dhdate;
    </refentryinfo>
    <refmeta>
        &dhucpackage;
        &dhsection;
    </refmeta>
    <refnamediv>
        <refname>&dhpackage;</refname>
        <refpurpose>Python XML Schema Bindings WSDL Introspection</refpurpose>
    </refnamediv>
    <refsynopsisdiv>
        <cmdsynopsis>
            <command>&dhpackage;</command>
            <arg><option>url</option></arg>
        </cmdsynopsis>
    </refsynopsisdiv>
    <refsect1>
        <title>DESCRIPTION</title>
        <para>
            This manual page documents briefly the <command>&dhpackage;</command> command.
        </para>
        <para>
            This manual page was written for the &debian; distribution because the original program does not have a manual page.
        </para>
        <para>
            <command>&dhpackage;</command> is a program that shows introspection information for one or more WSDL URLs.
        </para>
    </refsect1>
    <refsect1>
        <title>SEE ALSO</title>
        <para>pyxbgen(1), pyxbdump(1).</para>
    </refsect1>
    <refsect1>
        <title>AUTHOR</title>

        <para>This manual page was written by &dhusername; &dhemail; for
            the &debian; system (and may be used by others).  Permission is
            granted to copy, distribute and/or modify this document under
            the terms of the &gnu; General Public License, Version 2 any
            later version published by the Free Software Foundation.
        </para>
        <para>
            On Debian systems, the complete text of the GNU General Public
            License can be found in /usr/share/common-licenses/GPL.
        </para>

    </refsect1>
</refentry>

<!-- Keep this comment at the end of the file
Local variables:
mode: sgml
sgml-omittag:t
sgml-shorttag:t
sgml-minimize-attributes:nil
sgml-always-quote-attributes:t
sgml-indent-step:2
sgml-indent-data:t
sgml-parent-document:nil
sgml-default-dtd-file:nil
sgml-exposed-tags:nil
sgml-local-catalogs:nil
sgml-local-ecat-files:nil
End:
-->
<!doctype refentry PUBLIC "-//OASIS//DTD DocBook V4.1//EN" [

<!-- Process this file with docbook-to-man to generate an nroff manual
page: `docbook-to-man manpage.sgml > manpage.1'.  You may view
the manual page with: `docbook-to-man manpage.sgml | nroff -man |
less'.  A typical entry in a Makefile or Makefile.am is:

manpage.1: manpage.sgml
docbook-to-man $< > $@


The docbook-to-man binary is found in the docbook-to-man package.
Please remember that if you create the nroff version in one of the
debian/rules file targets (such as build), you will need to include
docbook-to-man in your Build-Depends control field.

-->

<!-- Fill in your name for FIRSTNAME and SURNAME. -->
<!ENTITY dhfirstname "<firstname>Michael</firstname>">
<!ENTITY dhsurname   "<surname>Fladischer</surname>">
<!-- Please adjust the date whenever revising the manpage. -->
<!ENTITY dhdate      "<date>12 July 2013</date>">
<!-- SECTION should be 1-8, maybe w/ subsection other parameters are
allowed: see man(7), man(1). -->
<!ENTITY dhsection   "<manvolnum>1</manvolnum>">
<!ENTITY dhemail     "<email>FladischerMichael@fladi.at</email>">
<!ENTITY dhusername  "fladi">
<!ENTITY dhucpackage "<refentrytitle>CELERY</refentrytitle>">
<!ENTITY dhpackage   "celery">

<!ENTITY debian      "<productname>Debian</productname>">
<!ENTITY gnu         "<acronym>GNU</acronym>">
<!ENTITY gpl         "&gnu; <acronym>GPL</acronym>">
]>

<refentry>
    <refentryinfo>
        <address>
            &dhemail;
        </address>
        <author>
            &dhfirstname;
            &dhsurname;
        </author>
        <copyright>
            <year>2013</year>
            <holder>&dhusername;</holder>
        </copyright>
        &dhdate;
    </refentryinfo>
    <refmeta>
        &dhucpackage;

        &dhsection;
    </refmeta>
    <refnamediv>
        <refname>&dhpackage;</refname>

        <refpurpose>Celery Worker Daemon</refpurpose>
    </refnamediv>
    <refsynopsisdiv>
        <cmdsynopsis>
            <command>&dhpackage;</command>
            <arg>command</arg>

            <arg><option>-A/--app=<replaceable>APP</replaceable></option></arg>
            <arg><option>-b/--broker=<replaceable>BROKER</replaceable></option></arg>
            <arg><option>--loader=<replaceable>LOADER</replaceable></option></arg>
            <arg><option>--config=<replaceable>CONFIG</replaceable></option></arg>
            <arg><option>--workdir=<replaceable>WORKING_DIRECTORY</replaceable></option></arg>
            <arg><option>-q/--quiet</option></arg>
            <arg><option>-C/--no-color</option></arg>
            <arg><option>--version</option></arg>
            <arg><option>--help</option></arg>
        </cmdsynopsis>
    </refsynopsisdiv>
    <refsect1>
        <title>DESCRIPTION</title>

        <para>This manual page documents briefly the
            <command>&dhpackage;</command> command.</para>

        <para>This manual page was written for the &debian; distribution
            because the original program does not have a manual page.</para>

        <para>
            <command>&dhpackage;</command> is a program that manages the
            Celery Worker Daemons and their queues.
        </para>

    </refsect1>
    <refsect1>
        <title>COMMANDS</title>
        <para>
            All inspect commands supports a --timeout argument, This is the number of seconds to wait for responses. You may have to increase this timeout if
            you’re not getting a response due to latency.
        </para>
        <variablelist>
            <varlistentry>
                <term>
                    <arg>shell</arg>
                </term>
                <listitem>
                    <para>
                        Drop into a Python shell. The locals will include the celery variable, which is the current app. Also all known tasks will be
                        automatically added to locals (unless the --without-tasks flag is set). Uses Ipython, bpython, or regular python in that order if
                        installed. You can force an implementation using --force-ipython|-I, --force-bpython|-B, or --force-python|-P.
                    </para>
                </listitem>
            </varlistentry>
            <varlistentry>
                <term>
                    <arg>status</arg>
                </term>
                <listitem>
                    <para>
                        List active nodes in this cluster.
                    </para>
                </listitem>
            </varlistentry>
            <varlistentry>
                <term>
                    <arg>result <option>-t <replaceable>task name</replaceable></option> <replaceable>uuid</replaceable></arg>
                </term>
                <listitem>
                    <para>
                        Show the result of a task. Note that you can omit the name of the task as long as the task doesn’t use a custom result backend.
                    </para>
                </listitem>
            </varlistentry>
            <varlistentry>
                <term>
                    <arg>purge</arg>
                </term>
                <listitem>
                    <para>
                        Purge messages from all configured task queues.
                        Warning: There is no undo for this operation, and messages will be permanently deleted!
                    </para>
                </listitem>
            </varlistentry>
            <varlistentry>
                <term>
                    <arg>inspect active</arg>
                </term>
                <listitem>
                    <para>
                        List active tasks. These are all the tasks that are currently being executed.
                    </para>
                </listitem>
            </varlistentry>
            <varlistentry>
                <term>
                    <arg>inspect scheduled</arg>
                </term>
                <listitem>
                    <para>
                        List scheduled ETA tasks. These are tasks reserved by the worker because they have the eta or countdown argument set.
                    </para>
                </listitem>
            </varlistentry>
            <varlistentry>
                <term>
                    <arg>inspect reserved</arg>
                </term>
                <listitem>
                    <para>
                        List reserved tasks. This will list all tasks that have been prefetched by the worker, and is currently waiting to be executed (does not
                        include tasks with an eta).
                    </para>
                </listitem>
            </varlistentry>
            <varlistentry>
                <term>
                    <arg>inspect revoked</arg>
                </term>
                <listitem>
                    <para>
                        List history of revoked tasks.
                    </para>
                </listitem>
            </varlistentry>
            <varlistentry>
                <term>
                    <arg>inspect registered</arg>
                </term>
                <listitem>
                    <para>
                        List registered tasks.
                    </para>
                </listitem>
            </varlistentry>
            <varlistentry>
                <term>
                    <arg>inspect stats</arg>
                </term>
                <listitem>
                    <para>
                        Show worker statistics.
                    </para>
                </listitem>
            </varlistentry>
            <varlistentry>
                <term>
                    <arg>control enable_events</arg>
                </term>
                <listitem>
                    <para>
                        Enable events.
                    </para>
                </listitem>
            </varlistentry>
            <varlistentry>
                <term>
                    <arg>control disable_events</arg>
                </term>
                <listitem>
                    <para>
                        Disable events.
                    </para>
                </listitem>
            </varlistentry>
            <varlistentry>
                <term>
                    <arg>migrate <replaceable>from</replaceable> <replaceable>to</replaceable></arg>
                </term>
                <listitem>
                    <para>
                        Migrate tasks from one broker to another (EXPERIMENTAL). This command will migrate all the tasks on one broker to another. As this
                        command is new and experimental you should be sure to have a backup of the data before proceeding. The value for each broker should be
                        a URL.
                    </para>
                </listitem>
            </varlistentry>
        </variablelist>
    </refsect1>
    <refsect1>
        <title>OPTIONS</title>

        <para>This program follows the usual &gnu; command line syntax,
            with long options starting with two dashes (`-').  A summary of
            options is included below.</para>

        <variablelist>
            <varlistentry>
                <term>
                    <option>-A <replaceable class="parameter">APP</replaceable></option>
                    <option>--app=<replaceable class="parameter">APP</replaceable></option>
                </term>
                <listitem>
                    <para>App instance to use (e.g. module.attr_name).</para>
                </listitem>
            </varlistentry>
            <varlistentry>
                <term>
                    <option>-b <replaceable class="parameter">BROKER</replaceable></option>
                    <option>--broker=<replaceable class="parameter">BROKER</replaceable></option>
                </term>
                <listitem>
                    <para>URL to the broker. Default is 'amqp://guest@localhost//'.</para>
                </listitem>
            </varlistentry>
            <varlistentry>
                <term>
                    <option>--loader=<replaceable class="parameter">LOADER</replaceable></option>
                </term>
                <listitem>
                    <para>name of custom loader class to use.</para>
                </listitem>
            </varlistentry>
            <varlistentry>
                <term>
                    <option>--config=<replaceable class="parameter">CONFIG</replaceable></option>
                </term>
                <listitem>
                    <para>Name of the configuration module.</para>
                </listitem>
            </varlistentry><varlistentry>
                <term>
                    <option>--workdir=<replaceable class="parameter">WORKING_DIRECTORY</replaceable></option>
                </term>
                <listitem>
                    <para>Optional directory to change to after detaching.</para>
                </listitem>
            </varlistentry>
            <varlistentry>
                <term>
                    <option>--quiet</option>
                </term>
            </varlistentry>
            <varlistentry>
                <term>
                    <option>-C</option>
                    <option>--no-color</option>
                </term>
            </varlistentry>
            <varlistentry>
                <term>
                    <option>--version</option>
                </term>
                <listitem>
                    <para>Show program's version number and exit.</para>
                </listitem>
            </varlistentry>
            <varlistentry>
                <term>
                    <option>-h</option>
                    <option>--help</option>
                </term>
                <listitem>
                    <para>Show help message and exit.</para>
                </listitem>
            </varlistentry>
        </variablelist>
    </refsect1>
    <refsect1>
        <title>SEE ALSO</title>

        <para>celeryd(1), celerybeat (1), celeryctl (1).</para>
    </refsect1>
    <refsect1>
        <title>AUTHOR</title>

        <para>This manual page was written by &dhusername; &dhemail; for
            the &debian; system (and may be used by others).  Permission is
            granted to copy, distribute and/or modify this document under
            the terms of the &gnu; General Public License, Version 2 any
            later version published by the Free Software Foundation.
        </para>
        <para>
            On Debian systems, the complete text of the GNU General Public
            License can be found in /usr/share/common-licenses/GPL.
        </para>

    </refsect1>
</refentry>

<!-- Keep this comment at the end of the file
Local variables:
mode: sgml
sgml-omittag:t
sgml-shorttag:t
sgml-minimize-attributes:nil
sgml-always-quote-attributes:t
sgml-indent-step:2
sgml-indent-data:t
sgml-parent-document:nil
sgml-default-dtd-file:nil
sgml-exposed-tags:nil
sgml-local-catalogs:nil
sgml-local-ecat-files:nil
End:
-->
